CeramBridge
Prepare a Brief
← Procurement Scenarios

Improve quality and inspection

Can the equipment meet your product and acceptance requirements?

For inconsistent finishing, missed defects, excessive rejection or a new quality requirement.

Follow the decision steps ↓
Improve quality and inspection

Confirm the problem

Describe the quality problem with identifiable samples and measurements. Decide whether the task is to improve the process, detect defects or both.

Build the acceptance test before judging the machine

  1. Agreed sample set
  2. Recorded test conditions
  3. Results by defect class
  4. Acceptance and exceptions

Set the acceptance criteria for your own products; no universal pass rate is assumed.

01

Prepare the evidence

Collect these records before narrowing the equipment or service scope.

  • Representative acceptable and defective samples with agreed classifications.
  • Tile material, surface, sizes, thickness and required operating speed.
  • Existing inspection, tooling, software and reject-interface information.
02

Compare approaches

Restore the existing process

Investigate tooling, calibration, wear and operating conditions.

Check before choosing

Use agreed measurements to verify the corrective work.

Upgrade inspection or controls

Check cameras, lighting, software, calibration and reject handling together.

Check before choosing

Confirm software use, backups and transfer/support conditions.

Source a replacement system

Test the actual candidate with your agreed product samples.

Check before choosing

Record misses and false rejects separately, with the test configuration.

03

Check the limits

  • A short sample trial does not establish long-term performance.
  • Agree defect classes, tolerances and test conditions before the trial.
  • Identify unavailable functions, missing licenses and support requirements.
Your decision file

A sample-test plan and the configuration checks needed before comparing offers.

04

Find equipment and support

Review relevant equipment

Open the individual equipment records and compare their condition and included scope.

Vision Inspection Squaring & Finishing Glazing & Decoration

Define the work around the machine

Choose fit checks, inspection, export preparation, installation and acceptance planning for the project.

Choose your service scope

Worked examples for this decision

How should you test a used vision inspection system?

Prepare your project requirements

Carry this buying task into a brief and add the measurements, equipment references and open questions you have.

Prepare a Project Brief