KEDA VDR-800
2019 · Vertical dryers · CB-DRYER-05
Running in line
Vertical · 800 × 800 mm
Recorded location Foshan, Guangdong
Site type and location confirmation date To be confirmed
Confirm the current address and inspection access before arranging a visit.
Condition recorded
Observed condition and test scope
Observed two consecutive rack cycles. One door seal shows compression set.
Unit price
CNY 328,000Machine views & details
Side view
Rear three-quarter view
Door seal
Observed two consecutive rack cycles. One door seal shows compression set.
Vertical rack and lift drive
Replace the seal at the next planned stop.
Controller and access platform
Equipment review
Equipment specifications
| Stock reference | CB-DRYER-05 |
|---|---|
| Manufacturer | KEDA |
| Model | VDR-800 |
| Year | 2019 |
| Recorded location | Foshan, Guangdong |
| Equipment type | Vertical dryers |
| Key specification | Vertical · 800 × 800 mm |
| Operating condition | Running in line |
| Condition recorded | 2026-10-24 |
Observed condition and test scope
Observed two consecutive rack cycles. One door seal shows compression set.
Included items and work before commissioning
Replace the seal at the next planned stop.
Check fit with your line
- Green tile format, incoming moisture and target exit moisture
- Throughput, dwell time, heat source and transfer heights
Checks to agree before purchase
- Roller, chamber and insulation condition
- Temperature distribution and controls where testable
- Included fans, interfaces and modules
Included equipment & purchase scope
Replace the seal at the next planned stop.
| Item | Quantity | Scope | Purchase check |
|---|---|---|---|
| Main machine assembly | 1 | Included | KEDA VDR-800 |
| Door seal | To confirm | Replacement required | Check the quantity and configuration against the signed equipment list. |
| Rack and lift mechanism | To confirm | Confirm | Check the quantity and configuration against the signed equipment list. |
| Fans and heat supply equipment | To confirm | Confirm | Check the quantity and configuration against the signed equipment list. |
Purchase configuration
Base price covers the listed unit and explicitly included items. Items marked for confirmation are excluded until agreed.
Recommended equipment packages
Choose one purchase option. Packages identify the actual units; line interfaces and acceptance checks must be agreed before ordering.
Combined with this unitKEDA VDR-800CB-DRYER-05
Included accessoriesDoor seal kit
Separate purchase totalCNY 1,009,600
You saveCNY 60,600
Included accessoriesDoor seal kitAdditional carrier roller set
Separate purchase totalCNY 1,015,200
You saveCNY 61,400
Packages include equipment and the named accessories. Transport, taxes and on-site commissioning are quoted separately.
Saved package unavailable. Unit-only pricing restored.
Reference exchange rates
System ratesEnter a positive rate between 0.00000001 and 1,000,000,000,000.
For reference only. Your rates change the estimate, not the CNY base price or final quotation.
Delivery & installation
Delivery plan for CB-DRYER-05
The packing and transport plan is confirmed after measuring the equipment and reviewing the buyer’s site access.
-
Confirm equipment scope
Supplier
Confirm what ships with this KEDA VDR-800 and assign any pre-commissioning work. Current scope notes: Replace the seal at the next planned stop.
Buyer
Confirm that the listed configuration (Vertical · 800 × 800 mm) suits your line. Send your process requirements, available utilities and delivery location.
Handover Signed equipment and exclusions list
-
Inspect and agree the trial
Supplier
Recorded condition: Running in line. Observed two consecutive rack cycles. One door seal shows compression set. Agree which chamber temperature, roller and control checks are possible and whether a representative green-tile drying trial can be run.
Buyer
Provide the samples, operating conditions and acceptance limits needed for any additional trial. Agree which checks can be completed at the seller’s site.
Handover Inspection record and agreed test scope
-
Approve quotation and transport plan
Supplier
For a horizontal dryer, measure each chamber section with its frame protection. For a vertical dryer, confirm the shipping height and permitted orientation. Compare enclosed container and oversize options.
Buyer
Confirm the destination, access route, unloading equipment and who handles customs clearance and inland delivery.
Handover Approved scope, freight method and delivery terms
-
Prepare and pack the equipment
Supplier
Number chamber joints and protect insulation and seals. For horizontal dryers, pack removed rollers with cushioning. For vertical dryers, secure the rack and lift mechanism for transit.
Buyer
Review the package dimensions, handling instructions and storage needs. Confirm access and the intended order of installation.
Handover Package-level packing list and loading photos
-
Load, ship and hand over
Supplier
Record package IDs, weights and securing points. Share the dispatch photos, packing list and freight milestones under the agreed terms.
Buyer
Coordinate receiving and lifting. Check package count and visible damage against the packing list before moving items into storage or installation.
Handover Shipping documents and receiving checklist
-
Install and verify at site
Supplier
Supply the agreed assembly records and confirm who handles repairs, start-up and any contracted site support.
Buyer
Prepare heat and exhaust connections, align transfers and agree warm-up checks and target exit moisture at the intended throughput.
Handover Commissioning and acceptance record
Packing & transport preparation
| Package | Preparation | Transport & handling |
|---|---|---|
| Tower and rack mechanism | Confirm permitted split points and transport orientation before dismantling. Restrain the rack and lifting mechanism. | Check shipping height and lifting access. Select oversize freight if measured packages require it. |
| Carrier rollers and utilities | Number carriers and connections, protect insulation and box loose rollers and control items. | Agree unloading order and the space needed to reassemble the tower safely. |