SACMI ECP 285
2021 · Horizontal roller dryers · CB-DRYER-04
Powered, unloaded
Horizontal · 2.85 m class
Recorded location Gao’an, Jiangxi
Site type and location confirmation date To be confirmed
Confirm the current address and inspection access before arranging a visit.
Condition recorded
Observed condition and test scope
Roller drive and cabinet powered. Burner firing was outside the check.
Unit price
CNY 486,000Machine views & details
Side view
Rear three-quarter view
Roller drive
Roller drive and cabinet powered. Burner firing was outside the check.
Control cabinet
Combustion connection and duct
Equipment review
Equipment specifications
| Stock reference | CB-DRYER-04 |
|---|---|
| Manufacturer | SACMI |
| Model | ECP 285 |
| Year | 2021 |
| Recorded location | Gao’an, Jiangxi |
| Equipment type | Horizontal roller dryers |
| Key specification | Horizontal · 2.85 m class |
| Operating condition | Powered, unloaded |
| Condition recorded | 2026-10-23 |
Observed condition and test scope
Roller drive and cabinet powered. Burner firing was outside the check.
Included items and work before commissioning
Combustion equipment requires a site check.
Check fit with your line
- Green tile format, incoming moisture and target exit moisture
- Throughput, dwell time, heat source and transfer heights
Checks to agree before purchase
- Roller, chamber and insulation condition
- Temperature distribution and controls where testable
- Included fans, interfaces and modules
Included equipment & purchase scope
Combustion equipment requires a site check.
| Item | Quantity | Scope | Purchase check |
|---|---|---|---|
| Main machine assembly | 1 | Included | SACMI ECP 285 |
| Roller drive | 1 set | Included; powered check | Check the quantity and configuration against the signed equipment list. |
| Electrical cabinet | 1 set | Included; powered check | Check the quantity and configuration against the signed equipment list. |
| Combustion equipment | To confirm | Site check required | Check the quantity and configuration against the signed equipment list. |
Purchase configuration
Base price covers the listed unit and explicitly included items. Items marked for confirmation are excluded until agreed.
Recommended equipment packages
Choose one purchase option. Packages identify the actual units; line interfaces and acceptance checks must be agreed before ordering.
Combined with this unitSACMI ECP 285CB-DRYER-04
Included accessoriesDoor seal kit
Separate purchase totalCNY 2,067,600
You saveCNY 124,100
Included accessoriesDoor seal kitAdditional carrier roller set
Separate purchase totalCNY 2,073,200
You saveCNY 124,900
Packages include equipment and the named accessories. Transport, taxes and on-site commissioning are quoted separately.
Saved package unavailable. Unit-only pricing restored.
Reference exchange rates
System ratesEnter a positive rate between 0.00000001 and 1,000,000,000,000.
For reference only. Your rates change the estimate, not the CNY base price or final quotation.
Delivery & installation
Delivery plan for CB-DRYER-04
The packing and transport plan is confirmed after measuring the equipment and reviewing the buyer’s site access.
-
Confirm equipment scope
Supplier
Confirm what ships with this SACMI ECP 285 and assign any pre-commissioning work. Current scope notes: Combustion equipment requires a site check.
Buyer
Confirm that the listed configuration (Horizontal · 2.85 m class) suits your line. Send your process requirements, available utilities and delivery location.
Handover Signed equipment and exclusions list
-
Inspect and agree the trial
Supplier
Recorded condition: Powered, unloaded. Roller drive and cabinet powered. Burner firing was outside the check. Agree which chamber temperature, roller and control checks are possible and whether a representative green-tile drying trial can be run.
Buyer
Provide the samples, operating conditions and acceptance limits needed for any additional trial. Agree which checks can be completed at the seller’s site.
Handover Inspection record and agreed test scope
-
Approve quotation and transport plan
Supplier
For a horizontal dryer, measure each chamber section with its frame protection. For a vertical dryer, confirm the shipping height and permitted orientation. Compare enclosed container and oversize options.
Buyer
Confirm the destination, access route, unloading equipment and who handles customs clearance and inland delivery.
Handover Approved scope, freight method and delivery terms
-
Prepare and pack the equipment
Supplier
Number chamber joints and protect insulation and seals. For horizontal dryers, pack removed rollers with cushioning. For vertical dryers, secure the rack and lift mechanism for transit.
Buyer
Review the package dimensions, handling instructions and storage needs. Confirm access and the intended order of installation.
Handover Package-level packing list and loading photos
-
Load, ship and hand over
Supplier
Record package IDs, weights and securing points. Share the dispatch photos, packing list and freight milestones under the agreed terms.
Buyer
Coordinate receiving and lifting. Check package count and visible damage against the packing list before moving items into storage or installation.
Handover Shipping documents and receiving checklist
-
Install and verify at site
Supplier
Supply the agreed assembly records and confirm who handles repairs, start-up and any contracted site support.
Buyer
Prepare heat and exhaust connections, align transfers and agree warm-up checks and target exit moisture at the intended throughput.
Handover Commissioning and acceptance record
Packing & transport preparation
| Package | Preparation | Transport & handling |
|---|---|---|
| Horizontal chamber modules | Mark each split joint and protect insulation, seals and exposed chamber edges. | Check each separated module against enclosed or oversize freight limits. |
| Rollers, fans and controls | Cushion rollers in supported bundles. Identify fans, ducts, cables and control modules. | Prepare an itemised packing list with installation order and receiving lifts. |