SACMI PH 2890
2016 · Hydraulic tile presses · CB-PRESS-01
Running in line
2,890 t · 600 × 600 mm
Recorded location Foshan, Guangdong
Site type and location confirmation date To be confirmed
Confirm the current address and inspection access before arranging a visit.
Condition recorded
Observed condition and test scope
Observed 30 consecutive cycles with the fitted mold. No oil pooling after warm-up.
Unit price
CNY 735,000Machine views & details
Side view
Rear three-quarter view
Operator cabinet
Hydraulic hose and coupling
Feeder and cabinet included. A second mold is priced separately.
SACMI PH2890 model marking
Equipment review
Equipment specifications
| Stock reference | CB-PRESS-01 |
|---|---|
| Manufacturer | SACMI |
| Model | PH 2890 |
| Year | 2016 |
| Recorded location | Foshan, Guangdong |
| Equipment type | Hydraulic tile presses |
| Key specification | 2,890 t · 600 × 600 mm |
| Operating condition | Running in line |
| Condition recorded | 2026-10-20 |
Observed condition and test scope
Observed 30 consecutive cycles with the fitted mold. No oil pooling after warm-up.
Included items and work before commissioning
Feeder and cabinet included. A second mold is priced separately.
Check fit with your line
- Pressing force, tile format and mold dimensions
- Feed direction, line height, cycle time and electrical supply
Checks to agree before purchase
- Nameplate and mold mounting drawings
- Cycle and pressure-hold test, leak history, and included feeder, tooling and hydraulics
Included equipment & purchase scope
Feeder and cabinet included. A second mold is priced separately.
| Item | Quantity | Scope | Purchase check |
|---|---|---|---|
| Main machine assembly | 1 | Included | SACMI PH 2890 |
| Powder feeder | 1 set | Included | Check the quantity and configuration against the signed equipment list. |
| Electrical cabinet | 1 set | Included | Check the quantity and configuration against the signed equipment list. |
| Fitted mold | To confirm | Confirm | Check the quantity and configuration against the signed equipment list. |
| Second mold | To confirm | Quoted separately | Check the quantity and configuration against the signed equipment list. |
Purchase configuration
Base price covers the listed unit and explicitly included items. Items marked for confirmation are excluded until agreed.
Recommended equipment packages
Choose one purchase option. Packages identify the actual units; line interfaces and acceptance checks must be agreed before ordering.
Combined with this unitSACMI PH 2890CB-PRESS-01
Included accessoriesHydraulic seal and filter kit
Separate purchase totalCNY 1,025,800
You saveCNY 61,500
Included accessoriesHydraulic seal and filter kitAdditional press mold
Separate purchase totalCNY 1,043,800
You saveCNY 64,200
Packages include equipment and the named accessories. Transport, taxes and on-site commissioning are quoted separately.
Saved package unavailable. Unit-only pricing restored.
Reference exchange rates
System ratesEnter a positive rate between 0.00000001 and 1,000,000,000,000.
For reference only. Your rates change the estimate, not the CNY base price or final quotation.
Delivery & installation
Delivery plan for CB-PRESS-01
The packing and transport plan is confirmed after measuring the equipment and reviewing the buyer’s site access.
-
Confirm equipment scope
Supplier
Confirm what ships with this SACMI PH 2890 and assign any pre-commissioning work. Current scope notes: Feeder and cabinet included. A second mold is priced separately.
Buyer
Confirm that the listed configuration (2,890 t · 600 × 600 mm) suits your line. Send your process requirements, available utilities and delivery location.
Handover Signed equipment and exclusions list
-
Inspect and agree the trial
Supplier
Recorded condition: Running in line. Observed 30 consecutive cycles with the fitted mold. No oil pooling after warm-up. Agree whether a pressure hold and a loaded tile trial can be performed.
Buyer
Provide the samples, operating conditions and acceptance limits needed for any additional trial. Agree which checks can be completed at the seller’s site.
Handover Inspection record and agreed test scope
-
Approve quotation and transport plan
Supplier
Measure the press frame and hydraulic skid separately. Compare enclosed container, flat rack and breakbulk options against the heaviest piece.
Buyer
Confirm the destination, access route, unloading equipment and who handles customs clearance and inland delivery.
Handover Approved scope, freight method and delivery terms
-
Prepare and pack the equipment
Supplier
Tag hoses and cables, cap open hydraulic ports and secure the frame to a purpose-designed skid. Crate the cabinet and any included tooling separately.
Buyer
Review the package dimensions, handling instructions and storage needs. Confirm access and the intended order of installation.
Handover Package-level packing list and loading photos
-
Load, ship and hand over
Supplier
Record package IDs, weights and securing points. Share the dispatch photos, packing list and freight milestones under the agreed terms.
Buyer
Coordinate receiving and lifting. Check package count and visible damage against the packing list before moving items into storage or installation.
Handover Shipping documents and receiving checklist
-
Install and verify at site
Supplier
Supply the agreed assembly records and confirm who handles repairs, start-up and any contracted site support.
Buyer
Confirm foundation and utility readiness, then agree dry-cycle, pressure-hold and sample-tile checks.
Handover Commissioning and acceptance record
Packing & transport preparation
| Package | Preparation | Transport & handling |
|---|---|---|
| Press frame | Secure the measured frame on an engineered skid and protect machined surfaces. | Confirm actual piece weight, centre of gravity and lifting plan. Compare enclosed freight with oversize options after measuring. |
| Hydraulic unit and controls | Cap open ports, identify hoses and protect upright cabinets against moisture. | Plan separate lifting and prevent loads resting on hoses, control doors or instruments. |
| Tooling and detached parts | Crate each agreed mold and detached item with its inventory ID. | Load to suit the buyer’s unloading and installation order. |