KEDA BM-08
2021 · Glaze mills · CB-MILL-06
Powered, unloaded
Batch glaze mill · 8,000 L nominal
Recorded location Jinjiang, Fujian
Site type and location confirmation date To be confirmed
Confirm the current address and inspection access before arranging a visit.
Condition recorded
Observed condition and test scope
Jog and stop functions checked. No wet batch run during the inspection.
Unit price
CNY 62,000Machine views & details
Side view
Rear three-quarter view
Starter cabinet
Guard and drive belt
Starter cabinet and guards included.
Hatch and seal
Equipment review
Equipment specifications
| Stock reference | CB-MILL-06 |
|---|---|
| Manufacturer | KEDA |
| Model | BM-08 |
| Year | 2021 |
| Recorded location | Jinjiang, Fujian |
| Equipment type | Glaze mills |
| Key specification | Batch glaze mill · 8,000 L nominal |
| Operating condition | Powered, unloaded |
| Condition recorded | 2026-10-25 |
Observed condition and test scope
Jog and stop functions checked. No wet batch run during the inspection.
Included items and work before commissioning
Starter cabinet and guards included.
Check fit with your line
- Batch versus continuous duty, usable capacity and target fineness
- Feed and discharge arrangements, slurry characteristics and lifting access
Checks to agree before purchase
- Liner and grinding-media condition
- Drive, gear, bearing and shell condition plus unloaded rotation where feasible
Included equipment & purchase scope
Starter cabinet and guards included.
| Item | Quantity | Scope | Purchase check |
|---|---|---|---|
| Main machine assembly | 1 | Included | KEDA BM-08 |
| Starter cabinet | 1 set | Included | Check the quantity and configuration against the signed equipment list. |
| Drive guards | 1 set | Included | Check the quantity and configuration against the signed equipment list. |
| Grinding media | To confirm | Confirm | Check the quantity and configuration against the signed equipment list. |
Purchase configuration
Base price covers the listed unit and explicitly included items. Items marked for confirmation are excluded until agreed.
Recommended equipment packages
Choose one purchase option. Packages identify the actual units; line interfaces and acceptance checks must be agreed before ordering.
Combined with this unitKEDA BM-08CB-MILL-06
Included accessoriesHatch seal kit
Separate purchase totalCNY 278,800
You saveCNY 16,700
Included accessoriesHatch seal kitAdditional alumina grinding media
Separate purchase totalCNY 297,300
You saveCNY 19,500
Packages include equipment and the named accessories. Transport, taxes and on-site commissioning are quoted separately.
Saved package unavailable. Unit-only pricing restored.
Reference exchange rates
System ratesEnter a positive rate between 0.00000001 and 1,000,000,000,000.
For reference only. Your rates change the estimate, not the CNY base price or final quotation.
Delivery & installation
Delivery plan for CB-MILL-06
The packing and transport plan is confirmed after measuring the equipment and reviewing the buyer’s site access.
-
Confirm equipment scope
Supplier
Confirm what ships with this KEDA BM-08 and assign any pre-commissioning work. Current scope notes: Starter cabinet and guards included.
Buyer
Confirm that the listed configuration (Batch glaze mill · 8,000 L nominal) suits your line. Send your process requirements, available utilities and delivery location.
Handover Signed equipment and exclusions list
-
Inspect and agree the trial
Supplier
Recorded condition: Powered, unloaded. Jog and stop functions checked. No wet batch run during the inspection. Agree whether an unloaded rotation check or a wet trial is possible. Review the liner, hatch seals and drive condition.
Buyer
Provide the samples, operating conditions and acceptance limits needed for any additional trial. Agree which checks can be completed at the seller’s site.
Handover Inspection record and agreed test scope
-
Approve quotation and transport plan
Supplier
Measure the shell on its transport cradle. Check whether it fits enclosed freight or needs a flat rack or breakbulk, and plan separate lifts for the drive and any supplied media.
Buyer
Confirm the destination, access route, unloading equipment and who handles customs clearance and inland delivery.
Handover Approved scope, freight method and delivery terms
-
Prepare and pack the equipment
Supplier
Agree how to drain and clean the shell, block it against rolling on a fitted cradle and protect the ring gear, journals and hatch. Pack the drive and any included media separately.
Buyer
Review the package dimensions, handling instructions and storage needs. Confirm access and the intended order of installation.
Handover Package-level packing list and loading photos
-
Load, ship and hand over
Supplier
Record package IDs, weights and securing points. Share the dispatch photos, packing list and freight milestones under the agreed terms.
Buyer
Coordinate receiving and lifting. Check package count and visible damage against the packing list before moving items into storage or installation.
Handover Shipping documents and receiving checklist
-
Install and verify at site
Supplier
Supply the agreed assembly records and confirm who handles repairs, start-up and any contracted site support.
Buyer
Confirm cradle removal and foundation readiness. Check drive alignment, unloaded rotation and, if agreed, slurry discharge and target fineness.
Handover Commissioning and acceptance record
Packing & transport preparation
| Package | Preparation | Transport & handling |
|---|---|---|
| Drum and supports | Drain and clean as agreed. Secure the shell on a fitted transport cradle and protect bearing seats. | Restrain against rolling. Select freight only after checking cradle dimensions and the heaviest piece. |
| Motor, drive and guards | Record alignment marks and protect drive teeth and shaft ends. | Pack detached drive parts on separate identified skids when required. |
| Grinding media and fittings | Weigh and pack included media separately. Cap slurry connections. | Confirm media inclusion, package weight and unloading equipment. |